SARCER BENDS & PIPES
Wear-resistant ceramic pipes for pneumatic conveying
SARCER BENDS and PIPES are a standard solution for all customers with wear problems in their pneumatic conveying lines.
SARCER BENDS and PIPES are made with a steel structure and an inner lining of SARCER segments. They are the products with the highest durability in all application areas, from the conveying of cement semi-finished products to pulverised coal and quartz.
SARCER BENDS AND PIPES provides the following product characteristics:
PHYSICAL CHARACTERISTICS
PROPERTY | VALUE |
Structure | Carbon Steel – Thickness 3 ÷ 6 mm |
Internal Lining | Al2O3 – 92% |
Hardness | 9 Mohs |
Wear (ASTM C704) | <0.3 cm³ |
Tmax | 150°C |
Advantages | Excellent Wear ResistanceExceptional Chemical ResistanceProven performance on a wide range of materialsHigh Heat Resistance |
AVAILABLE FORMATS
|
|
|
| BENDS |
|
|
|
|
Nominal Diameter (mm) | 50 | 70 | 80 | 100 | 125 | 150 | 175 | 200 |
Average Radius (mm) | 1000 | 1500 | 2000 | |||||
Bending Angle (deg) | 30° | 45° | 90° | |||||
|
|
|
| PIPES |
|
|
|
|
Nominal Diameter (mm) | 50 | 70 | 80 | 100 | 125 | 150 | 175 | 200 |
Length (mm) | 1000 | 2000 | 3000 | |||||
|
|
|
| SARCER SEGMENTS |
|
|
|
|
Internal Diameter (mm) | 50 | 70 | 80 | 100 | 125 | 150 | 175 | 200 |
Thickness (mm) | 5 ÷ 10 | 10 ÷ 25 |
These tables provide standard indices. SARO is able to fulfill any other dimensional requests, whether they are below, within, or above these standards.
SARCER Bends and Pipes are technical solutions designed by SARO for wear-resistant applications in pneumatic conveying systems handling highly abrasive materials.
The components are made with:
- an outer steel structure
- an inner lining of cylindrical SARCER segments
The design ensures:
- full integration with existing plants
- high erosion resistance
- long service life
- reduced plant downtime
These solutions are a benchmark for heavy-duty applications in the conveying of:
- pulverised coal
- cementitious materials
- ash
- abrasive minerals
- industrial powders
- insulation materials
- ceramic and glass products
SARCER Bends and Pipes are used in:
- steelworks
- coke plants
- thermal power plants
- cement plants
- mining plants
- the ceramics industry
- the glass industry
- material processing plants
The solutions are designed based on the specific operating conditions of the plant, considering:
- abrasiveness of the material
- conveying speed
- line geometry
- fluid-dynamic conditions
- required operating continuity
The objective is to ensure:
- maximum wear protection
- high system reliability
- reduced maintenance
- longer service life of pneumatic lines
- production continuity even in the most severe operating conditions.
8
Not for Product Specifications
Disclaimer
The technical data contained herein is for reference purposes only. Please contact the technical department for assistance and recommendations regarding specifications for this product.
The information provided in this technical data sheet (TDS), including recommendations for the use and application of the product, is based on the manufacturer's knowledge and experience as of the date of this TDS. The product may have a variety of different applications, as well as different application and working conditions in the environment of use beyond the manufacturer's control. SARO Srl, therefore, is not responsible for the suitability of the product for the production processes and conditions for which it is used, nor for the intended applications and results. It is strongly recommended to conduct your own tests to confirm its suitability. Any liability relating to the information contained in the technical data sheet or any other written or oral recommendation regarding the product is excluded.
SARO Srl expressly disclaims all express or implied warranties, including warranties of merchantability or fitness for a particular purpose, arising from the sale or use of SARO Srl products. SARO Srl expressly disclaims any liability for consequential or incidental damages of any kind, including lost profits.
