SARCER BENDS & PIPES
Wear-resistant ceramic pipes for pneumatic conveying
SARCER CURVE and TUBI are a standard solution for all customers with wear problems in their pneumatic conveying lines.
SARCER CURVE and TUBES are made with a steel structure and an inner lining of Sarcer Segments. They are the products with the highest performance in terms of durability in all application areas, from the transport of cement intermediates to coal dust and quartz.
SARCER CURVE AND TUBES provides the following product features:
PHYSICAL CHARACTERISTICS
PROPERTY |
VALUE |
Structure |
Carbon Steel – Thickness 3 ÷ 6 mm |
Internal Coating |
Al₂O₃ – 92% |
Hardness |
9 Mohs |
Wear (ASTM C704) |
0.3 cm³ |
Tmax |
150°C |
Advantages |
Excellent Wear ResistanceExceptional Chemical ResistanceTested with excellent results on multiple materialsHigh Heat Resistance |
AVAILABLE FORMATS
|
|
|
|
CURVE |
|
|
|
|
Nominal diameter (mm) |
50 |
70 |
80 |
100 |
125 |
150 |
175 |
200 |
Average Radius (mm) |
1000 |
1500 |
2000 |
|||||
Curvature Angle (rad) |
30° |
45° |
90° |
|||||
|
|
|
|
Tubi |
|
|
|
|
Nominal diameter (mm) |
50 |
70 |
80 |
100 |
125 |
150 |
175 |
200 |
Length (mm) |
1000 |
2000 |
3000 |
|||||
|
|
|
|
RESEARCH SEGMENTS |
|
|
|
|
Inner diameter (mm) |
50 |
70 |
80 |
100 |
125 |
150 |
175 |
200 |
Thickness (mm) |
0.5 |
10 to 25 |
These tables provide standard indices. SARO is able to fulfill any other dimensional requests, whether they are below, within, or above these standards.
SARCO Curve and Tubes are technical solutions designed by SARO for wear-resistant applications in pneumatic conveying systems for highly abrasive materials.
The components are made with:
- external steel structure
- SARCER cylindrical segment internal lining
The design ensures:
- Full integration with existing systems
- high resistance to erosion
- long operating life
- Plant stop reduction
These solutions set the standard for heavy-duty applications in the transport of:
- coal dust
- cementitious materials
- ashes
- abrasive minerals
- industrial dusts
- insulation materials
- Ceramic and glass products
SARCER Curve and Tubes are used in:
- steel mills
- coking plant
- thermal power plants
- cement plants
- mining facilities
- Ceramic industry
- glass industry
- material treatment plants
The solutions are designed based on the specific operating conditions of the plant, considering:
- material abrasiveness
- transport speed
- geometry of lines
- fluid dynamic conditions
- business continuity required
The objective is to ensure:
- Maximum wear protection
- high system reliability
- maintenance reduction
- Increasing the useful life of pneumatic lines
- continuous operation even under the most severe operating conditions.
8
Not for the product specifications
Warnings
The technical data contained herein is for reference purposes only. Please contact the technical department for assistance and recommendations regarding specifications for this product.
The information provided in this technical data sheet (TDS), including recommendations for the use and application of the product, is based on the manufacturer's knowledge and experience as of the date of this TDS. The product may have a variety of different applications, as well as different application and working conditions in the environment of use beyond the manufacturer's control. SARO Srl, therefore, is not responsible for the suitability of the product for the production processes and conditions for which it is used, nor for the intended applications and results. It is strongly recommended to conduct your own tests to confirm its suitability. Any liability relating to the information contained in the technical data sheet or any other written or oral recommendation regarding the product is excluded.
SARO Srl expressly disclaims all express or implied warranties, including warranties of merchantability or fitness for a particular purpose, arising from the sale or use of SARO Srl products. SARO Srl expressly disclaims any liability for consequential or incidental damages of any kind, including lost profits.
